Electrolytic mold cleaning machine KME-120L

Model:

大于号.png KME-30L、KME-60L、KME-120L

Advantage:

大于号.png Significantly improve cleaning efficiency by more than 5 times

大于号.png Clean mold surface dirt, reduce product surface defect rate

大于号.png Clean the mirror without any dirt

大于号.png No damage to cleaning

大于号.png Mould grooves, grooves, angles, blind holes, vents, screw holes, etc. are thoroughly cleaned

大于号.png Restore the true color of the mold, the surface is bright and clean

大于号.png Excellent cleaning effect without any damage

Applicable industry:

大于号.png Sealing ring, precision rubber, small household appliances, automobiles, fitness equipment and other industries

Online consultation Online message

Hotline：0755-27095381

Operating procedures

Add KME-102C cleaning solution to the cleaning tank.

Put the disassembled mold core into the cleaning basket.

Adjust the electrode pad, the electrode pad should be at least 5CM away from the mold workpiece.

Turn on the power switch, turn on the electrolysis switch and the ultrasonic switch in sequence, the cleaning work starts, and the cleaning time is set to be about 15 minutes.

After the cleaning time is reached, the cleaning is over, the machine stops working and automatically alarms, and the cleaned workpiece is rinsed with tap water to remove the remaining cleaning liquid on the workpiece.

Dry the mold core with a blower, and the cleaning work is over.

Actual effect comparison