Instructions:

After the mold is washed with water, it only needs to be soaked in the water-based rust preventive liquid. Moisture attached to the mold surface will be absorbed. After drying, only the water will evaporate, and the anti-rust liquid will form a uniform anti-rust film on the mold surface that can isolate the air.

Advantages of water-based anti-rust fluid:

 Reliable anti-rust effect

 It has twice the penetrating power of water and can penetrate into the fine structure inside the part.

 Unlike sprays, a protective film can be formed on the entire surface of the mold, so that the mold can get the most comprehensive protection. Reduce waste and reduce costs.

 Water-based anti-rust liquid, which is different from oily, will not stick, and does not need to be wiped.

 The anti-rust film disappears at 100°C, and good products can be produced from the beginning of molding without waste.

 It will not diffuse around and pollute the air like sprays, and there is no fear of being inhaled by the human body.

 Reduce waste discharge from sprayer cans.